ocr: (Bottom board of Disk Drive) FRONT -L -Neg) - 470 onms Resistor +Pos) I 8 BACK IC111 Place LED here Place the LED in the same position as noted in the drawing above on both the internal and external drive. I used the smallest Red LED that Radio Shack has; the same size as the low charge indicator on RS Model 100. The exact location is 1 inch below eject hole and 1/4inch to the right. You have more room in the external drive than in the internal. The internal has to be placed exactly in the location mentioned above. Leave about 10inches of wire S0 that you have plenty of slack to work the wire ...
(.png)
.iso/Pictures/Everything Else…5/LED/LED.png)